Blowers

BLC Series

DESCRIPTION AND USE
Centrifugal electric blowers widely used on board for extraction and ventilation of air in closed environments (WC, kitchens, engine rooms, etc.)..

CONSTRUCTION FEATURES
Spiral casing: made of painted steel.
Fan: steel forward blade, dynamically and statically balanced.
Note: our blowers are supplied of series with flanged fittings in the inlet and outlet side and a safety grid in the inlet side.

ELECTRIC MOTOR:
Direct Current:
Permanent magnets motor 12/24V, Protection IP 23÷44, Insulation Class F, Continuous Duty (S1).
Alternate Current:
Induction electric motor, 230V single-phase (M) / 230÷400V three-phase (T), 50Hz, Protection IP44÷55, Insulation Class F, Continuous Duty (S1).

ORIENTATION
Attention: the orientation of the blower must be stated when the ordering:
RD: right direction
LD: left direction

  • BLC

BLR Series

DESCRIPTION AND USE
High efficiency Centrifugal electric blowers suitable to grant very high capacities of clean or slightly dusty air with temperature up to 60° C. This fan are widely used on board for suction and ventilation of air in closed environments (WC, kitchens, engine rooms, etc.).

CONSTRUCTION FEATURES
Spiral casing: made of painted steel.
Fan: steel backward curved blades, dynamically and statically balanced.

ELECTRIC MOTOR:
Alternate Current:
Induction electric motor, 230V single-phase (M) / 230÷400V / 400÷690V three-phase (T), 50Hz, Protection IP54÷55, Insulation Class F, Continuous Duty (S1).

ORIENTATION
Attention: the orientation of the blower must be stated when the ordering:
RD: right direction
LD: left direction

  • BLR

Serija VE • VEX

DESCRIPTION AND USE
Helicoidal (axial) electric blowers widely used on board for suction and ventilation of air in closed environments (WC, kitchens, engine rooms, etc.).

CONSTRUCTION FEATURES
Drum casing:
VE series: made in painted steel sheet
VEX series: made in stainless steel
Fan: made in polypropylene (temperature range -5°C + 80°C), dynamically and statically balanced.

MOTOR
Direct Current:
Permanent magnets motor 12/24 V, Protection IP44 (IP55 on request), Insulation Class F, Continuous Duty (S1).
Alternate Current:
Induction electric motor, 230V single-phase (M) / 230÷400V, 400÷690V three-phase (T), 50Hz, Protection IP54÷55, Insulation Class F, Continuous Duty (S1).

ACCESSORIES ON REQUEST
Fan made in aluminium
Bi-direction fan made in Nylon / Glass to grant the same performances in both directions of flux (flux A: ventilator + flux P: extractor). Temperature range: – 35°C + 110 °C.
Additional protection grid

FLUX DIRECTIONS
Attention: the flux direction, protection grid position and the execution of the blower must be stated when the ordering (see page 169 for more specification)
A-A1 flux: ventilator
P-P1 flux: extractor
R-R1 flux: bi-directional (A & P)

  • VEX
  • VE

+386 1 42 33 540

info@stal.si

Contact us with any questions

    [/et_pb_section]