Interceptors

Zipwake started with a vision.

In this case, to develop and bring to the motorboat world new, complete and highly competitive solutions to the well-known trim problems of planing and semi-planing boats. In 2011, a carefully selected team of engineers with solid knowledge and experience from both the marine and automotive industry was put together. After three and a half years of intense product development, the first Zipwake Dynamic Trim Control system, the Series S, was launched in Amsterdam in November at METS 2014.

Zipwake’s stylish control panel is carefully designed to be user-friendly and intuitive to allow the driver to focus on the right thing – enjoying the boat ride! The panel’s two unique control wheels provide easy, quick and intuitive manual control of running trim, heel or heading. However, the system normally operates in automatic control mode, which is enabled by a single press on the AUTO button.

Installation of the complete interceptor system is not demanding and doesn’t require any special knowledge or tools for that matter. Interceptors can be installed in almost every vessel. In some cases bellow the waterline in other above the waterlline using only glue or screws. In each set you’ll find a template for choosing the place where interceptors should be mounted.

A complete package

The Zipwake Dynamic Trim Control System comes complete with everything you need, including all necessary parts and software for active motion control. This at a reasonable price due to mass production and use of micro components developed for the the marine and automotive industries.

SMART RIDE CONTROLER

Zipwake’s stylish control panel is carefully designed to be user-friendly and intuitive to allow the driver to focus on the right thing – enjoying the boat ride!
The panel’s two unique control wheels provide easy, quick and intuitive manual control of running trim, heel or heading. However, the system normally operates in automatic control mode, which is enabled by a single press on the AUTO button. In this mode, the built-in high-frequency GPS, 3D gyro sensors and robust motion controller automatically ensure dynamic elimination of un- comfortable and dangerous boat pitch and roll.

Push the AUTO BUTTON – and GO!

The system provides continuous feedback of boat speed, pitch and roll angle, as well as the interceptors positions, on a 2.4” sunlight-readable color display.

  • Fully automatic
  • Dynamic pitch and roll control
  • Steering enhancement
  • Built-in GPS and motion sensors
  • Unique and intuitive 3D controls
  • Sunlight readable color display
  • Instant state user feedback
  • Auto power on/off via ignition key sense
  • Full range of electrical interfaces
  • NMEA 2000
  • Waterproof
  • Auto dimming / night mode
  • Upgradable via USB stick
  • Up to four control panels in the system
  • Surface or flush mount
  • Manages installation configurations from 1 up to 6 interceptors

SPECIFICATIONS

Model –  CP-SModel CP-S

Display –  2.4’’ Transflective color TFT, 320 x 240 pixels, double-sided,anti reflection coated window

Internal sensors – 5 Hz GPS, 3D Gyro, 3D Accelerometer, Ambient light

Supply Voltage – 12 – 32 V DC

Power Consumption – 10 W max

Operating Temperature – -20° to +85°C (-4° to +185°F)

Storage Temperature – -40° to +90°C (-40° to +194°F)

Waterproof Rating – IP67 / IP64 (front / back)

Compass Safe distance – 0.5 m (1.7 ft)

Compliance – CE, FCC

 Weight – 0.22 kg (0.49 lbs)

 Mounting – Flush or surface

INTERFACES

  • I-BUS IN (CAN bus)
  • I-BUS OUT (CAN bus)
  • NMEA 2000
  • External GPS (NMEA 0183 / RS232 auto baud-rate sensing)
  • Key senses
  • USB Device Port (Type A)
  • USB Host Port (Type B)

ORDERING DATA

Included in Kit Boxes

Available as an Accessory

Available as a Spare Part

Model CP-S

Part No. 2011238 with Standard Cable 7 m

SPECIFICATIONS

Model KB300-SKB450-SKB600-SKB750-S
Width680 mm680 mm980 mm980 mm
Depth156 mm156 mm156 mm156 mm
Height274 mm274 mm274 mm274 mm
Weight7.0 kg8.5 kg10.6 kg11.7 kg

SYSTEM

Zipwake Series S, the world’s first inexpensive dynamic trim-control system, incorporates a state-of-the-art family of durable, fast-acting interceptors. The system is fully automatic. It significantly enhances the boat’s performance, fuel economy, comfort and safety when accelerating, turning or running in a seaway.

  • Dynamically eliminates uncomfortable and dangerous boat pitch and roll.
  • Automatically minimizes wave resistance and saves fuel.
  • Built-in quality, simplicity and easy expansion, yet still affordable.

KIT BOX

A Kit Box includes all parts needed to install a Dynamic Trim Control System with one pair of fast-acting straight interceptors. There are four different Kit Boxes, one for each interceptor length.

Any base installation can be expanded with up to two extra pairs of Series S interceptors, thus allowing a total of six interceptors without any need for additional connectors or power supply.

ORDERING DATA

Model: KB300-S Part number: 2011145

Model: KB300-S Part number: 2011145

Model: KB450-S Part number: 2011146

Model: KB600-S Part number: 2011147

Model:KB750-S Part number: 2011148

 

CHARACTERISTICS OF THE INTERCEPTORS OF ZIPWAKE

+386 1 42 33 540

info@stal.si

 

Send an inquiry