State of the art Interceptors

STATE OF THE ART INTERCEPTORS

Series S constitutes a product family of four straight and four V-shaped interceptors. This first-ever modular design made for mass production makes the interceptors durable, affordable and perfectly adapted to any planing or semi-planing boat between 6 m and 18 m (20-60ft).

All components have been meticulously engineered to withstand impact and avoid water ingress, minimizing the risk of costly maintenance and downtime. Interceptor or blade actuation takes place by way of a calibration-free submersible electric servo within the interceptor unit. Its natural water cooling provides excellent working conditions for the brushless DC servo motor, which runs on 12-32 volts. The blade stroke takes 1.5 seconds, outperforming conventional trim tabs by at least a factor of 5.

Installation is made easy with an integral mounting plate and the option of a concealed or above-waterline, self-sealing, thru-hull cable fitting. The preferred mounting option is achieved by simply routing the servo cable differently. Each interceptor comes with the thru-hull cable fitting, cable covers and a practical drill template.

NOW EVEN MORE DYNAMIC

We are proud to present our latest ”world’s first” – mass produced V-shaped interceptors. They make the successful Series S even more versatile and highly competitive. V-shaped interceptors for centerline mounting are perfect for filling the gap between twin outboards or sterndrives, as well as dual propeller tunnels.
The four V-shaped models cover deadrise angles effectively between 11 to 24 degrees.

V-shaped centerline mounted interceptors can be included in new installations, or retro-fitted to already installed systems. The modular design enables boat designers to develop their own novel applications, e.g. in multihulls or stepped high- speed craft.

SPECIFICATIONS – S SERIES

Model

Lenght

Weight

Max. Boat speed

Blade Stroke

Blade Rate

Thru-Hull Cable Fitting

Servo actuator

Cable Length

Cable Material

Connector

Connector Diameter

Supply Voltage

Power Consumption

Operating Temperature

Storage Temperature

Waterproof Rating

Compliance

Connector Diameter

IT300-S / IT450-S / IT600-S / IT750-S

300 (12) / 450 (18) / 600 (24) / 750 (30) / mm (in)

2.1(4.6) 2.8 (6.2) 3.5 (7.7) 4.0 (8.8) kg (lbs)

60 knots

30 mm (1.2 in)

20 mm/s (0.8 in/s)

Concealed or above waterline

SU-S

3 m (10 ft), extendable up to 6 m (20 ft)

PUR

M12 5-pin circular

14.5 mm (0.57 in)

12 – 32 V DC

25 W max

0° to +40°C (+32° to +104°F)

-40° to +90°C (-40° to +194°F)

IP68 5 m (16 ft)

CE, FCC

14.5 mm (0.57 in)

ORDERING DATA

  • Included in Kit Boxes
  • Available as an Accessory 
  • Available as a Spare Part

Model IT300-S Part number: 2011232 

Model: IT450-S Part number: 2011233 

Model: IT600-S Part number: 2011234 

Model: IT750-S Part number: 2011235

SPECIFICATIONS V – SERIES

Model

Lenght

Weight

Max. Boat Speed

Blade Stroke

Blade Rate

Thru-Hull Cable Fitting

Servo actuator

Cable Length

Cable Material

Connector

Connector Diameter

Supply Voltage

Power Consumption

Operating Temperature

Storage Temperature

Waterproof Rating

Compliance

IT450-S V13 / IT450-S V16 / IT450-S V19 / IT450-S V22

450 (18) / 450 (18) / 450 (18) / 450 (18) / mm (in)

3.2(7.1) / 3.3 (7.3) / 3.4 (7.5) / 3.5 (7.7) kg (lbs)

60 knots

30 mm (1.2 in)

20 mm/s (0.8 in/s)

Concealed or above waterline

SU-S

3 m (10 ft), extendable up to 6 m (20 ft)

PUR

M12 5-pin circular

14.5 mm (0.57 in)

12 – 32 V DC

25 W max

0° to +40°C (+32° to +104°F)

-40° to +90°C (-40° to +194°F)

IP68 5 m (16 ft)

CE, FCC

ORDERING DATA

  • Available as an Accessory
  • Available as a Spare Part

Model IT450-S V13Part number: 2011482

Model IT450-S V16  –  Part number: 2011483

Model: IT450-S V19  –  Part number: 2011484

Model: IT450-S V22  –  Part number: 2011485

DISTRIBUTION UNIT

The Distribution Unit supplies the system with power and can accommodate up to six Series S interceptors. The unit is connected to the main control panel. It is robust, waterproof, oil resistant and ignition protected for mounting in an engine room. The power cable is included for easy connection to a battery. The distribution unit has built-in electrical protection, including its own protection fuse.

SPECIFICATIONS

Model

Supply Voltage

Power Consumption

Protection Fuse

Power Cable Length

Operating Temperature

Storage Temperature

Waterproof Rating

Oil resistance

Compliance

Weight

DU-S

12 – 32 V DC

0.1 W max

10 A ATO

4 m (13 ft), Diameter 9 mm (0.35 in), 12 AWG

-20° to +85°C (-4° to +185°F)

-40° to +90°C (-40° to +194°F)

IP67 with cables and/or protective caps mounted

Common engine fluids

CE, FCC, SAEJ1171 Ignition Protected

1.0 kg (2.2 lbs) including the power cable

CONNECTORS

  • Six interceptor connections
    I-BUS OUT (power and CAN bus to control panels)
  • 2-lead power cable

ORDERING DATA

  • Included in Kit Boxes
  • DU-S Included in Kit Boxes DU-S Available as an Accessory Available as a Spare Part Part No. 2011239 with Power Cable 4 m

EXTERNAL GPS ANTENA

The Zipwake external GPS antenna is a 5Hz, 20-channel receiver with excellent reception that provides accurate and rapid vessel position and speed updates. Vessel speed is necessary input for the Zipwake’s automatic motion controller. The antenna has a rugged construction, is fully waterproof and can be pole or surface mounted on any vessel.

The external GPS is optional and intended to be used when no other strong GPS signal is available for the Zipwake system, e.g. when the vessel has just one helm station with a shielding top (roof) and lacks other accessible GPS sources. In this case, the external GPS antenna is a good solution. Its 5 m cable can be extended up to 15 m using Zipwake extension cables. It connects easily to the connector marked EXT GPS on the back of the control panel. The external GPS can be connected to any control panel installed in the system.

Model

Connectors

Cable Material

Cable Length

Supply Voltage

Power Consumption

Protocol

NMEA Sentences

Baud Rate

Update Rate

Number of Channels

Average Time to First Fix

Operating Temperature

Storage Temperature

Waterproof Rating

Compliance

Weight

Mounting

GPS

M12 5-pin circular

Bel PVC

5 m (16 ft) extendable to max 15 m (49 ft)

5 V DC ±5%

0.28 W, 55 mA (average)

NMEA 0183 / RS232

RMC, VTG, GGA, GSA, GSV, GLL

38400

5 Hz

20

Hot start 6 s, Warm start 38 s, Cold start 42 s

-30° to +85°C (-22° to +185°F)

-40° to +95°C (-40° to +203°F)

IP67

CE, FCC

0.065 kg (0.14 lbs) without cable and connector

Flush or pole

ORDERING DATA

  • Available as an Accessory Available as an
  • Accessory Available as a Spare Part Model: GPU Part No. 2011240 with Cable 5 m and Mount Kit

CABLES

The Standard Cable is used to connect the main control panel to the distribution unit, usually located on or near the transom. This cable is also used to connect the main panel to the next panel, e.g. the flybridge. The Standard Cable can be extended by using any of the available extension cables. The servo unit cable can be extended using 1.5 m or 3 m extension cables.

The total servo cable length must not exceed 6 m (20 ft).

 

SPECIFICATIONS

Model

Lenght

Weight

Standard

SC7-M12

7 m

0,38 kg

7 m (23)

 

EC1.5-M12

1,5 m

0,10 kg

Extension

EC3-M12

3 m

0,18 kg

Extension

EC5-M12

5 m

0,28 kg

Extension

EC10-M12

10 m

0,56 kg

ORDERING DATA 

Included in Kit Boxes

Available as an Accesory

Available as a spare part

 

Model: SC7-M12

 

 

 

 

 

Model: SC7-M12

 Part No. 2011257

 

 

Model: EC1.5-M12

Part No. 2011258

 

 

 

Model: EC3-M12

Part No. 2011259

 

 

 

Model: EC10-M12

Part No. 2011260

CABLE COVER

The thru-hull cable fitting of Series S interceptors can either be concealed behind the interceptor or positioned above the waterline. If the above-waterline mount is preferred, three parts are available to protect the cable: thru-hull cover, cable cover and a cable cover extension.
These parts are available as a cable cover kit to provide flexible routing of the cable on the transom.

SPECIFICATIONS

Model: CC-S Weight: 0.18 kg

Items in kit

  • 1 x Thru-hull cover1 x Thru-hull cover
  • 1 x Cable cover
  • 1 x Cable cover extension

ORDERING DATA

Available as an Accesory

Available as a spare part –  Model: CC-S   –  Part No. 2011071 comes with each Interceptor, part numbers 2011232-2011235

 

SERVO UNIT

The Series S submersible electrical Servo Unit fits inside the interceptor, where it drives with precision the mechanism that provides linear motion to the interceptor blades. The unit is fast-acting, durable, calibration free and easy to install or replace. It comes with a rugged 3 m cable with self-sealing thru-hull fitting.

Model

Servo Motor Type 

Supply Voltage

Power Consumption 25 W max

Operating Temperature

Storage Temperature

Waterproof Rating

Compliance 

Cable Length

Cable Material

Connector

Connector Diameter 

Weight

SU-S

Brushless DC with Hall sensors

12 – 32 V DC

25 W max

0° to +40°C (+32° to +104°F)

-40° to +90°C (-40° to +194°F)

IP68 5 m (16 ft)

CE, FCC

3 m (10 ft), extendable up to 6 m (20 ft)

PUR

M12 5-pin circular

14.5 mm (0.57 in)

0.75 kg (1.7 lbs) including cable